MadgeTech Wind110 DataLogging Anemometer 25' cable

MadgeTech Wind 110
Data Logging Anemometer
(for computers running Windows 95/98/NT/2000/XP)

Need to know the average wind speed at your site? The WIND110 is a complete system to accurately measure and record wind speed (also known as a data logging anemometer). The self contained, low cost wind speed recording system comes complete with a data logger, weatherproof enclosure, three cup anemometer and all the necessary cabling to quickly get up and running. The logger can record up to 16,383 readings and the storage medium is non-volatile, solid state memory, providing maximum data security even if the battery becomes discharged. The device is started and stopped directly from a computer using user-friendly software. System includes a 3-cup anemometer with 25 foot cable*, the Pulse110 data recorder in a weatherproof enclosure, and interface cable and software kit (IFC110).

*You can also order this anemometer system with a 50-foot cable.

The anemometer should be mounted vertically in an open area, as high up as possible. It should be mounted on a pole so that the Wind110 is unobstructed and clear of debris. The anemometer can be mounted using a cotter pin on a 13 mm (0.5 in.) diameter mast with a #35 hole, 11 mm (0.35 in.) from the top.  The anemometer is non-directional, and will measure wind blowing in any horizontal direction. To ensure the most accurate readings, adjust the position of the anemometer on the bracket so that it is level. Run the 25' (ft.) of provided cable* to the location where the data logger will be mounted, securing it roughly every 2 feet. There are 4 mounting holes (0.2 in. diameter spaced 2.5 in. square) on the watertight enclosure.

The Wind110 measures both instantaneous and average wind speed. Data is retrieved by either taking your laptop out to the logger and connecting via the USB interface cable, or by removing the logger and taking it inside to download the data via USB.

SOFTWARE
MadgeTech’s Data Recorder Software is an easy to use Windows-based software package that allows the user to effortlessly collect, display and analyze data. A variety of powerful tools allow you to examine, export, and print professional looking data with just a click of the mouse. MadgeTech Data Recorder Software features an initial menu option to select English, French, German, Italian, Spanish, Dutch, Polish, Swedish, and Chinese.

The MadgeTech Data Logger software requires an IBM or compatible PC with the following:

• PC-compatible Pentium(R)-class system
  
• Windows 95/98/NT/2000/XP
  
• Color SVGA monitor (800 x 600 resolution)
  
• 128 MB (or more) RAM
  
• At least 30MB free hard disk space (for installation)
  
• CD-ROM (for installation media)
  
• Available 9 pin male serial (COM) port (for serial logger interface cable)
  
• Available USB port (for USB logger interface cable)

*Specifications are subject to change without notice. Specific warranty and remedy limitations apply.

See Product Documentation section above for more information.