Sun Pumps SunPumps GF-100 Sensor Floatswitch

SunPumps
GF-100 Sensor Float Switch
(for use with SunPumps Submersible Pump Controllers)

Sensor float switches are used for low current devices such as magnetic contactors or pump control panels. The GF-100 is a low cost, three wire sensor float switch and is normally open in the down position. It is a mechanical activated switch and is NSF approved for potable water.

If used with a SunPumps PC-Series controller it can be either a Pump-Up or a Pump-Down switch because the controller has a logic reversing circuit allowing easy logic change for any desired application.

If used with the Grundfos CU-200 controller, it becomes a Pump-Up switch. It will turn the pump off when the tank is full.

Maximum power rating: 5 Amps 125/250 VAC 50/60 Hz