AET 4X6.5 Ae-Series, Crystal Clear Collector

List Price:	$1,188.00
Our Price:	$831.60 Save: $356.40 (30%)
Model:	AET-26
Brand:	Alternate Energy Technologies
Availability:	2 - 3 Months

This item ships truck freight only, shipping will not automatically be calculated.

Need help selecting components and designing your system?
Give our Knowledgeable Sales Folks a call at 877-878-4060.

Our Code: ALNAE-26

Reviews click to view hide

There are currently no reviews. If you own this product write a review!

Product Documentation click to view hide

AE_Collector_Brochure.pdf

Alternate Energy Technologies LLC Alternate Energy Technologies
AE- Series Solar Collectors

Since its introduction in 1987 the AET AE-Series has set a new standard in solar thermal collector excellence. Available in a wide range of sizes and models the AE collectors offer excellent performance and structural integrity. AE-Series collectors have been successfully utilized in all facets of residential, commercial and industrial applications.

AE- Series Solar Collectors AE Collector Specifications

Glazing: 1 sheet of solite glass, 1/8” or 5/32” thick with 0.01% iron oxide content. Transmittance: 91.0%
Glazing Gasket: EPDM Channel with molded corners.
AE Collector
Insulation: 1-¼” Foil-faced poly-isocyanurate board insulation. (R-10). ¾” Foil-faced poly-isocyanurate board in side walls and under headers. (R-6).
Frame Wall and Batten: 6063 T6 Aluminum extrusion. (1/8” wall) Electrostatic paint finish. Electrostatic paint integral mounting system.
Backsheet: 0.019 stucco embossed aluminum sheet MB-40 bronze, pop-riveted to frame wall.
Absorber Plate: Exclusively manufactured by Thermafin Manufacturing. All copper fin and tube construction. High frequency forge welded for permanent bond between tube and sheet. No soldered or crimped joints to fair from expansion and contraction. 30 year warranty on fin-to-tube joint.
Absorber Coating: Crystal Clear Absorptivity: ~ 0.97 Emissivity: ~ 0.07
Individually Leak Tested At: 125 PSI
Design Life: 30 Years
Flow Rate: 0.5 to 1.8 GPM recommended
Warranty: 10 year limited – Consult Factory

NOTE: Mounting hardware NOT INCLUDED

AET Solar Collectors CODE APPROVALS

California Energy Commission (TIPSE) 1981
Florida Solar Energy Center (FSEC) 1981
Arizona Solar Energy Commission (AEL) 1981
Tennessee Valley Authority (TVA) 1981
International Association of Plumbing and Mechanical Officials (IAMPO) 1981
Department of Housing and Urban Development (HUD) 1979
Solar Rating and Certification Corporation (SRCC) 1981

Additional standards considered for design and construction of AET solar collectors:

Interim Minimum Property Standards Supplement, HUD 4930.2, 1977
Uniform Solar Energy Codes, IAPMO, 1976
Installation Standards…Solar, SMALNA, 1977
City of Los Angeles Solar Collector Approval
South Florida Building Code Sect. 203 and 204

AE Collectors Model #'s:

MODEL #	AE-40	AE-32	AE-26	AE-24	AE-21
A	121 3/16”	97 3/16”	77 3/16”	97 3/16”	85 3/16”
B	47 3/16”	47 3/16”	47 3/16”	35 3/16”	35 3/16”
C	118 5/8”	94 5/8”	74 5/8”	94 5/8”	82 5/8”
D	50.5”	50.5”	50.5”	38.5”	38.5”
E	3 1/8”	3 1/8”	3 1/8”	3 1/8”	3 1/8”
F	37.71SF	31.85SF	25.29SF	23.75SF	20.82SF
G	37.4 SF	29.9 SF	23.6 SF	21.9 SF	19.2 SF
WEIGHT (lbs.)	160	113	90	114	100
FLUID CAPACITY	1.6 GAL.	1.3 GAL.	1.1 GAL.	0.9 GAL.	0.8 GAL.