Leveredge Guardian 2x12 Collector for Pool Heating

Add-Ons

Leveredge Guardian Collector Panel Kit

Leveredge Guardian Solar Pool Heating System Kit

Leveredge Guardian Collector Row Spacer Kit

Leveredge Auto Control Package for Guardian System

Guardian
Solar Pool Heating System

How Does Our Solar Pool Heater Work?

Simply.
All you do is set the desired pool temperature on your control panel (see 1 in the diagram) and the sun does the rest. When your electronic controller senses 2 that there is enough sunlight to heat your pool and that your pool is colder than you desire, water is automatically diverted 3 to your solar system 4. Your pool pump 5 sends pool water to the solar collectors. As the water flows through 120 tubes in each collector, the sun’s energy heats it. The solar-heated water then flows back to your pool. This simple cycle continues until your pool reaches your desired temperature. You can also cool your pool during warmer months by simply running your pool pump at night. Your control system will automatically switch to cooling your pool.

Features:

• Captures the Most Solar Energy
  Guardian pool collectors have been tested by two different independent aboratories (The Florida Energy Center and Ortec Laboratories). In each case, Guardian received one the highest test scores for heat collection ever achieved for polypropylene solar pool collectors.
• Most Durable Construction
  Our headers are molded directly to the extruded absorber surface, forming a permanent, leak-free bond. Guardian's tube-on-fin absorber expands and contracts with temperature changes, relieving the stresses that cause other solar collectors to deteriorate with age.
• Proven Materials
  Guardian is made from a special formulation of polypropylene that has demonstrated high reliability in solar pool heating applications for over twenty years, in all climates. Our proprietary formulation attracts the sun’s energy but resists its damaging effects.
• Better Flow
  Generous, 1.5" (inside diameter) headers and straight-through water flow in the absorber reduce pressure losses, improving water flow. Better flow raises collector performance and assures maximum pool filtration.
• Better Appearance
  Our injection molding process smoothly joins the header and absorber, assuring consistently superior workmanship. Installed collectors are close-coupled, minimizing the space between absorbers. The narrower gap improves the appearance of the array and fits more solar into less roof area.

Lifetime Warranty:

• Industry’s only non-prorated lifetime product warranty
• Labor costs supported for 10 years
• As long as you own your Guardian solar pool collectors, they are fully protected under our warranty
• That’s confidence
• That’s peace of mind

Sure-Fit Installation:

Size your system:

The collector square area should be 70% of your pool's surface area. Measure the surface area of your pool and multiply it by 0.70. Now order the quantity of 2' x 10' or 2' x 12' panels to match that number. For example, if your pool is 14' x 28' that's 392 square feet. You will need to order 392 x 0.7 = 274.4 square feet of collectors, or 14 collectors (they're skinny!). For each collector you order, order one Panel Kit. Order only one System Kit for the entire system. If you have an obstruction (e.g. a chimney on a roof) to go around, you may need the Row Space Kit.

And by the way - did we mention the collectors are repairable?