Xantrex Pp-Sw4024/S Pwr Panel-1 Sw4024 Inverter

Xantrex SW4204
Power Panel Systems
(with SW Series Inverters)
PP-SW4024/D and PP-SW4024/S
Pre-assembled, integrated "balance of system" panel

A cost-effective alternative to assembling everything yourself These hard-to-find Xantrex SW power panels are pre-assembled by Xantrex and offered while supplies last at a fantastic price! Panels are certified to UL standards by ETL Testing Laboratories as a complete system. If you are looking to assemble your own system, we'd suggest buying a power panel system. It'll save you time, frustration, money and some of the potential dangers of assembling it all yourself. Can be used with wind, solar, or hydro DC charging sources

Dual Inverter Power Panel

Single Inverter Power Panel

Specifications

Included in all SW Power Panel Systems:

• Powder-coated steel backplate prewired with all NEC / UL required AC & DC overcurrent protection and disconnects (only for indoor installation). Simply connect to the battery and AC loads and your system is operational.
• 60 amp AC system bypass that allows inverter servicing while keeping AC loads connected to the grid or generator
• Flexible conduit for connection of the system to the battery enclosure
• ETL listed components and enclosure
• Negative/ground bonding block.
• Sine wave AC power inverter with high-efficiency, bidirectional operation
• Up to 11 kW of continuous AC power Up to 60 amps of AC input from a generator or utility grid
• Three-stage, temperature-compensated battery charging (up to 300A @ 12VDC, 240A @ 24 VDC, and 150A @ 48 VDC)
• Utility-interactive and generator-support operating modes

The Details

The SW Series Power Panel includes all National Electric Code (NEC) required components, wiring and safety circuitry. The power panel meets NEMA type 1 environmental standards for indoor mounting only. All power panel systems offer proven Xantrex inverters, with all the features, performance and reliability that has made them the industry standard. Each power panel is shipped by truck in a wooden container.

The SW Power Panel system comes ready for installation, pre-wired with the following:

• SW Series pure sinewave AC power inverter with high efficiency and bi-directional (to feed/sell back into the grid) operation, includes:
  • 30 amp AC pass-thru power at 120 VAC (/S=Single system) or 120/240 VAC (/D Dual system)
  • Adjustable three stage, temperature compensated battery charging
• 175 or 250 amp DC disconnect breaker*
• 60 amp AC disconnect/bypass breaker in box*
• AC and DC wiring in conduit* (battery cables not included)
• Powered coated steel back-plate (40"Hx43"Wx1"D)
• Battery Temperature Sensor
• Inverter Conduit Box*
• Negative/Ground Bonding Block
• 500 amp/50mV shunt (for remote metering)

  * These items are doubled on /D (Dual = two inverters) systems

Power Panel Systems

Part Number	Inverter(s)	Power	DC Input	Min Cable**	VAC Output	Charger
PP-SW4024/D	SW4024 x 2	8.0 KW	24 VDC	4/0 AWG x 2	120/240 @ 60 hz	120 amps x 2
PP-SW4024S	SW4024	4.0 KW	24 VDC	4/0 AWG	120 @ 60 hz	120 amps

Dual Power Panel system (/D) require two battery cable pair. Total battery cable length that is usable is 1 foot less than the length ordered due to 1 foot required in the DC disconnect (e.g. PPO-BC5-2/0 is 5 feet long one-way, but 4 feet usable to the battery bank).

Shipping

Because power panels are an assembly of various components and a metal backplate, they weigh at least 150lbs. As a result, power panels cannot be shipped via by UPS and must be shipped by Truck Freight. Shipping cost range widely, depending on size of power panel and distance to be shipped. Panels are shipped directly from Xantrex (where they are assembled).