Sunwize Pr 600-24-600-Tiaa-101, 24V, 600W System

SunWize™ Power Ready Systems

SunWize™ Power Ready Systems are complete, fully integrated power supplies designed for site loads requiring 12, 24 or 48 volts DC. Each system provides safe and reliable power generation without the need and expense of installing utility power. The sealed, maintenance free batteries are designed for deep cycle operation and extended life in solar applications. The aluminum array support structures and battery enclosures are strong yet lightweight and corrosion resistant for harsh marine or severe weather locations. Because Power Ready Systems are designed to withstand rugged transportation to remote sites, single-lift integral lifting lugs and/or forklift slots are provided. Optional helicopter handling features are also available. The system is fully assembled for factory testing before shipment. The prewired systems are typically shipped fully assembled with a protective cover over the array and are bolted to a skid. The solar array for larger systems is shipped in a separate plywood crate and the battery enclosure is mounted on a skid. In some cases, batteries are shipped separately. Power Ready Systems carry a oneyear system warranty for materials and workmanship. A three-year SunWize performance warranty is available on pre-packaged systems. The solar modules have up to a 25-year warranty, the longest in the industry. Careful component selection results in a system with a lifetime exceeding 25 years with battery replacements every five to ten years.

Industrial Prepackaged Solar Power Systems for: Telecommunications RTU/SCADA Applications Data Collection Instrumentation Security Lighting & Surveillance Navigational Aids Flow Monitoring UHF/VHF Radio Seismic Monitoring Tank Gauging Radio Telephones Railroad Signaling Area/Sign Lighting Cellular Extenders Microwave Repeaters Wireless Data Cathodic Protection Irrigation Control

HOW TO SELECT YOUR SYSTEM
The chart below specifies a system designed to meet the daily load of your equipment.

1. Use the maps below to select the insolation zone that corresponds to the equipment site location.
2. Determine your daily equipment load requirement in Amp–hrs/day at the specified voltage.
3. In the Selection Table, under your “peak sun hours” column, find the value of Amp–hours/day that is greater than or equal to your load.
4. Based on your system voltage, select your SunWize part number.

SYSTEM SELECTION TABLE
(Figures below are daily load in Amp–hrs/day. Refer to the maps at the bottom of this page.)

12 Volt SYSTEMS	PEAK SUN HOURS											24 Volt SYSTEMS
	1.0	1.5	2.0	2.5	3.0	3.5	4.0	4.5	5.0	5.5	6.0
PR 005-12-019-EIAA-000	.24	.36	.48	.60	.72	.84	.96	1.0	1.2	1.3	1.4	PR 010-24-038-CPAA-000
PR 010-12-019-EIAA-000	.48	.72	.96	1.2	1.4	1.6	1.9	2.1	2.4	2.6	2.8	PR 020-24-038-CPAA-000
PR 020-12-038-CPAA-000	.96	1.4	1.9	2.4	2.8	3.3	3.8	4.3	4.8	5.2	5.7	PR 040-24-038-CPAA-000
PR 036-12-079-CPAA-000	1.6	2.5	3.3	4.2	5.0	5.8	6.7	7.5	8.4	9.2	10.0	PR 072-24-079-FPAA-000
PR 050-12-120-CPAA-100	2.4	3.6	4.8	6.0	7.2	8.4	9.6	10.8	12.0	13.2	14.4	PR 100-24-120-FPAA-100
PR 075-12-125-CPAA-100	3.6	5.4	7.2	9.0	10.8	12.6	14.4	16.2	18.0	19.8	21.6	PR 150-24-125-FPAA-100
PR 100-12-240-FPAA-100	4.8	7.2	9.6	12.0	14.4	16.8	19.2	21.6	24.0	26.4	28.8	PR 200-24-240-FPAA-100
PR 115-12-240-FPWA-101	5.5	8.2	11.0	13.8	16.2	19.2	22.4	25.0	28.2	31.6	35.0	PR230-24-240-FPWA-101
PR 150-12-250-FPAA-100	7.2	10.8	14.4	18.0	21.6	25.2	28.8	32.4	36.0	39.6	43.2	PR 300-24-250-FPAA-100
PR 200-12-375-FPAA-100	9.6	14.4	19.2	24.0	28.8	33.6	38.4	43.2	48.0	52.8	57.6	PR 400-24-375-TIAA-101
PR 240-12-480-FPAA-100	11.5	17.2	23.0	28.7	34.5	40.2	46.0	51.7	57.5	63.2	69.0	PR 480-24-500-TIAA-101
PR 300-12-600-TIAA-101	14.4	21.6	28.8	36.0	43.2	50.4	57.6	64.8	72.0	79.2	68.4	PR 600-24-600-TIAA-101
PR 350-12-720-TIAA-101	16.8	25.2	33.6	42.0	50.4	58.8	67.2	75.6	84.0	92.4	100.8	PR 700-24-750-TIAA-101
PR 400-12-750-TIAA-101	19.2	28.8	38.4	48.0	57.6	67.2	76.8	86.4	96.0	105.6	108.0	PR 800-24-750-TIAA-101
PR 450-12-900-TIAA-101	21.6	32.4	43.2	54.0	64.8	75.6	86.4	97.2	108.0	118.8	129.6	PR 900-24-900-TIAA-101
PR 500-12-1000-TIAA-101	24.0	36.0	48.0	60.0	72.0	84.0	96.0	108.0	120.0	132.0	144.0	PR1000-24-900-TIAA-101

These Standard Power Ready Systems above, are just a few of the possible combinations of features you can order. All of our Power Ready Systems come with certain standard features, but you may customize your system with a wide variety of other options. For instance, none of our 48 Volt system selections are listed above, but they are most certainly available. Listed below are the standard features, followed by a full description of the many other options you may choose and how to designate these options in the full Power Ready System Part Number. Contact us with the full part number and we'll assemble your customized system for you.

Standard Features and Benefits

• Solar modules are fully encapsulated to resist harsh weather conditions
• Low voltage load disconnect for battery protection
• Sealed, lead-acid battery designed for deep discharge cycling
• NEC code compliant overcurrent protection and safety disconnect
• Temperature compensated battery charging
• Corrosion resistant control/battery enclosure
• Installation, operation & maintenance documentation
• Solid state electronics for improved efficiency and reliability
• Preassembled, prewired systems minimize field installation time & eliminate wiring errors
• Low maintenance and operating costs
• Complete systems reduce specifying and buying time
• Quality components assure long system life
• Full system and performance warranty available on prepackaged systems

Part Number

• Module Wattage
• System Voltage
  • 12 volts
  • 24 volts
  • 48 volts
• Battery Amp-hr Rating (based on 100-hour discharge rate)
• Enclosure Type
  • F – Front opening hinged door, pole mounted
  • T – Top opening hinged door, ground/pad mounted
  • C – Front opening door (screw-type), pole mounted
  • E – Economy
• Module Mount Type
  • I – Integral with enclosure
  • P – Pole mount, separate from enclosure
  • G – Ground mount, separate from enclosure
• Enclosure Finish
  • A – Milled aluminum (standard)
  • W– Powder coated white aluminum
  • S – Galvanized steel
  • F – Fiberglass reinforced polyester
• Mount Finish
  • A – Milled aluminum
  • P – Painted steel
  • S – Galvanized steel
• Wire Protection
  • 0 – PV and battery wired directly to controller, fused battery line
  • 1 – DC-rated circuit breakers for PV and battery (standard – NEC compliance)
• Lightning Protection
  • 0 – Standard MOV surge protection
  • 1 – Silicon-oxide varistor (SOV)
• Load Distribution and Control
  • 0 – None, load wired directly to controller
  • 1 – Four terminal load distribution block (standard)
  • 2 – DC-rated circuit breaker
  • 3 – Multi-cycle timer

System Options (choose ANY & enter into SunWize Part Number)

• a. DC to DC converter (specify output voltage/current)
• b. DC to AC inverter (specify output voltage/current)
• c. Data logging / Remote monitoring
• d. Cathodic protection controller
• e. Electronic load compartment
• f. Theft deterrent solar module hardware
• g. Helicopter lifting lugs
• h. Bird deterrent (stainless steel strips for solar module)

Controller Options (choose ONE & enter into SunWize Part Number)

• i. SunWize LCD - displays battery voltage, SOC, charging & load current, controller status/errors
• j. SunWize LVA - low battery SOC/load disconnect contact closure

If you need help getting your part number right, don't hesitate to contact us. Contact us to determine shipping charges too.

Insolation Maps

North America

(Back to Selection Chart)

South America

(Back to Selection Chart)

Eastern Hemisphere

(Back to Selection Chart)