1/2" Strain Relief with 2 Round Holes

This product is no longer available.

The below information is presented for informational purposes only. You may also find similar items in the category.

Need help selecting components and designing your system?
Give our Knowledgeable Sales Folks a call at 877-878-4060.

Our Code: ALR-SR-2HOLES

If you own this product write a review!

Does the job... by Peter Lindstrom

Rating:

This 2-hole strain relief was just what I needed to cleanly go from USE-2 wire to 1/2" EMT (with a 1 Continue...

Strain Reliefs
Use the 1/2" threaded connectors to provide a waterproof entrance or exit for wiring on PV module junction boxes, outdoor combiner boxes, and junction boxes. Use the 3/4"connector for larger cables up to 5/8"diameter. They are made of Nylon with Buna-N seals and are resistant to salt water, weak acids, weak alkalis, alcohol, ether, esters, ketones, and mineral, animal and vegetable oils. The threads are 1/2"or 3/4"NPT. Non-corrosive and suitable for direct burial installations. The two-hole 1/2"connector is designed for use with two #10 or #12 type USE conductors like the ones used for MultiContact PV output cables. UL listed. Suitable for use in NEMA 4, 6 and 12 applications. Locknuts not included.
ALR-SR-1HOLE1/2 holds USE #12 & #10	ALR-SR-1HOLE3/4 holds cable 0.4 - 0.7 inches in cross section
ALR-SR-2HOLES